Customize the ti-base to 5 possible heights.
Select the height of the ti-base in the order form.
H4= 4mm
H5 = 5mm (cut between the grooves, see image to the right)
H6 = 6mm
H8 = 8mm
H10 = 10mm
Go digital with full arch or multi unit temporaries
7 possible heights (5.1 – 12mm)
The lowest cut possible is above the second notch. Heights are represented in the library as H5.1-H12.
For a larger housing for immediate loading, select “Imm” for the height.
